flat collector AMX 2.38
Solar panels
Flat collector
Solar systems with the help of AMX collectors convert the sun’s radiant energy into usable heat.
The heat energy generated in the solar collectors is transferred with the help of the heat transfer fluid to the solar utility water or solar industrial water storage tank, in which the heat is stored. Effective system performance is ensured by the differential temperature controller connected to the circulation pump.
One-time connection of the absorber
The flat liquid collector AMX is equipped with an absorber in which a new and unique technology for connecting the plate to the pipe system has been used. The technology is based on rolling the copper pipes, which increases the heat exchange surface by a factor of seven.
Innovative collector frame construction
The AMX collector uses modern aluminum bending technology. The technology consists in making the main frame from a single section of the profile without unnecessary welds in the corners. A frame without welds is much tighter, has a more aesthetic appearance and, most importantly, there is no risk of the frame leaking after several years of use.
Unique design
The aluminum color of the housing, as well as the dark blue-black shade visible through the solar glass, enhances the look of any roof.
High performance
An excellent absorber, well thought-out housing design and very good thermal insulation of the AMX collector means that it achieves very high performance in both summer and winter.
Installation on any roof
The specially developed aluminum mounting systems ensure quick and safe installation of the solar collectors on any roof and any roof covering
standards and tests
The AMX collector was tested in the INTA research laboratory in Spain and has a quality award from Solar Keymark.
Technical Data
| Application: | support of underfloor heating Support warming swimming pools Support the preparation of domestic hot water |
| Dimensions: | |
| length | 2246 mm |
| Width | 1066 mm |
| Height | 90 mm |
| Weight | 39.6 kg |
| Area: | |
| gross area | 2.39 m2 |
| aperture area | 2.19 m2 |
| absorber surface | 2.19 m2 |
| Frame: | |
| frame material | aluminum (without welds) |
| sealing material | glue |
| Collector floor: | |
| material thickness | 0.4 mm aluminum sheet |
| Absorber: | |
| material | copper harp, aluminum coating |
| thickness | 0.3 mm |
| selective layer | Highly selective |
| absorption factor | 0.95 ± 0.01 |
| emission factor | 0.05 ± 0.02 |
| absorber content | 1.42 l |
| heat transfer medium | Propylene glycol + water/ glycerin + water |
| shape of the flow | double harp |
| absorber tubes | 10 x Ø8 x 0.5 mm |
| collecting pipes | 2 x Ø22 x 1.0 mm |
| connections | 2 |
| Glass: | |
| Art | Solar Glass |
| thickness | 4 mm |
| transmission factor | 0.915 |
| Thermal insulation: | |
| material | mineral wool |
| thickness | 40 mm |
| Additional data: | |
| stagnation temperature | 143 °C |
| Max. operating pressure | 10 bar |
| collector power η0 | 82.4% |
| microventilation | Yes |
| Recommended flow rate | 25-60 l/m3 xh |
| quantity in 1 row | up to 7 collectors (recommended 5) |
| Colors: | Natural aluminum color |
| Mounting options: | Roof terrace foundation Wall |
